ICON Stage 3 System for 2010+ FJ Cruiser/4Runner (Tubular and Non-Tubular)

  • Sale
  • $4,409.70


2010 - Current Toyota 4Runner Suspension System - Stage 3
(see details below of both non-tubular and tubular)

NON-TUBULAR
Overview:

The Stage 3 suspension system for the 2010 + Toyota 4Runner uses the same components as the Stage 2 system along with adding a set of our Billet Aluminum Rear Lower Links. This system contains our Extended Travel Coil-over shocks, and Billet Upper Arms to enhance your front suspension. In the rear, our 2" Lift coils and ICON V.S. 2.0 Aluminum Series shocks give your 4Runner much better ride quality and performance. For the avid off-roader in mind, we have engineered a stronger lower link system like no other suspension manufacturer. ICONS's 6061 Toyota 4Runner Billet Aluminum Lower Links can be easily adjusted on the truck for optimum pinion angle, and are protected by a machined nylon skid strip to help slide over rocks without damage to the links structure. On top of it all, these Links have been positioned to give correct roll steer geometry for the best possible handling on and offroad.

Tech Info:

• We recommend the use of our #56100 shock shin guards or a protective boot to reduce the chance of shock shaft damage. These shocks are located in a vulnerable position that allows debris to easily come in direct contact with the shock shaft.

Wheel & Tire Fitment Info:

OEM Wheels & Tires:    Yes

Aftermarket Wheels:    16" - 18" w/ up to 5" Backspace

                                 20" + w/ up to 5.250 Backspace (pending wheel make)

Aftermarket Tires:       33" Tall Tires

                                 Larger Tires May Fit but Fender Trimming and Modifications will be Required.

System Components:

58647    (QTY - 1)  - Extended Travel Adjustable Coil-over Shock Kit

58551    (QTY - 1)  - Billet Uniball Upper Control Arm Kit

52700    (QTY - 1)  - 2" Lift Rear Coil-spring Kit

56505    (QTY - 2)  - ICON V.S. 2.0 Aluminum Series Rear Mono-tube Shocks w/ Internal Reservoir

54000    (QTY - 1)  - Billet Aluminum Lower Rear Trailing Arm Kit

Options:

56100   (QTY - 1)  - ICON Rear shock shin guards

54100    (QTY - 1)  - Billet upper adjustable link arms

54200    (QTY - 1)  - Adjustable track bar

52800    (QTY - 1)  - ICON Overland Series dual rate 3" lift rear coil springs

56104    (QTY - 1)  - Rear hydraulic bumpstop kit

198000  (QTY - 1)  - ICON 2 pin spanner wrench

 

2010 - Current Toyota 4Runner Suspension System - Stage 3

TUBULAR

Overview:

The Stage 3 suspension system w/ tubular uca for the 2010 + Toyota 4Runner uses the same components as the Stage 2 system along with adding a set of our Billet Aluminum Rear Lower Links. This system contains our Extended Travel Coil-over shocks, and Tubular Upper Arms to enhance your front suspension. In the rear, our 2" Lift coils and ICON V.S. 2.0 Aluminum Series shocks give your 4Runner much better ride quality and performance. For the avid off-roader in mind, we have engineered a stronger lower link system like no other suspension manufacturer. ICONS's 6061 Toyota 4Runner Billet Aluminum Lower Links can be easily adjusted on the truck for optimum pinion angle, and are protected by a machined nylon skid strip to help slide over rocks without damage to the links structure. On top of it all, these Links have been positioned to give correct roll steer geometry for the best possible handling on and offroad.

Tech Info:

• We recommend the use of our #56100 shock shin guards or a protective boot to reduce the chance of shock shaft damage. These shocks are located in a vulnerable position that allows debris to easily come in direct contact with the shock shaft.

• Works with KDSS equipped Vehicles
 
Wheel & Tire Fitment Info:

OEM Wheels & Tires:    Yes

Aftermarket Wheels:    16" - 18" w/ up to 5" Backspace

                                 20" + w/ up to 5.250 Backspace (pending wheel make)

Aftermarket Tires:       33" Tall Tires

                                 Larger Tires May Fit but Fender Trimming and Modifications will be Required.

System Components:

58647    (QTY - 1)  - Extended Travel Adjustable Coil-over Shock Kit

58451    (QTY - 1)  - Tubular Uniball Upper Control Arm Kit

52700    (QTY - 1)  - 2" Lift Rear Coil-spring Kit

56505    (QTY - 2)  - ICON V.S. 2.0 Aluminum Series Rear Mono-tube Shocks w/ Internal Reservoir

54000    (QTY - 1)  - Billet Aluminum Lower Rear Trailing Arm Kit

Options:

56100   (QTY - 1)  - ICON Rear shock shin guards

54100    (QTY - 1)  - Billet upper adjustable link arms

54200    (QTY - 1)  - Adjustable track bar

52800    (QTY - 1)  - ICON Overland Series dual rate 3" lift rear coil springs

56104    (QTY - 1)  - Rear hydraulic bumpstop kit

191011  (QTY - 1)  - ICON tubular uniball upper control arm cover caps

198000  (QTY - 1)  - ICON 2 pin spanner wrench

Does not ship to Canada!